فورسپس جهت کشیدن دندانهای قدامی فوقانی
فورسپس جهت کشیدن دندانهای قدامی فوقانی ( cryre forceps – maxillary universal forceps ) :
دارای آرواره های کرو و یک گودی بیضی شکل در سطح داخلی آن می باشد .
شکل نوک این وسیله ، استاندارد بوده و شکل آناتومیکی سطح گونه ای و زبانی دندانه ها مطابقت دارد .
داری دسته های کرو ، با برجستگی های لوزی شکل بر روی آن است .
-
برای مشاهده محصولات دیگر برروی کلمهی “ورودبه سایت“ کلیک نمایید . /
-Click on the ” Login o site “ to view other products ./
مورد استفاده از فورسپس دندانهای قدامی :
جهت کشیدن دندان های پیش ، نیش و آسیای کوچک فک بالا ( راست و چپ ) کار برد دارد .
این وسیله طوری در دست گرفته می شود که نوک کرو آن به سمت پایین قرار گیرد .
فورسپس های کشیدن دندان را اغلب باشماره از فرد اسکراب در خواست می کنند تا نام آن ها .
توضیحات بیشتر درباره فورسپس دندانهای قدامی :
این وسیله طوری در دست گرفته می شود که نوک کرو آن ، به سمت پایین قرار می گیرد .
فورسپس های کشیدن دندان را اغلب با شماره از فرد اسکراب درخواست می کنند تا نام آن ها .
-
برای مشاهده محصولات دیگر برروی کلمهی “ورودبه سایت“ کلیک نمایید . /
-Click on the ” Login o site “ to view other products ./
-
DENTAL NUMBERING SYSTEMS
Permanent Teeth
There are three different numbering systems used to identify the teeth in dentistry.The Universal Numbering System was adopted by the ADA and is in use by most general dentists today.
Tooth number 1 is the tooth farthest back on the right side of the mouth in the upper (maxillary) jaw.
Numbering continues along the upper teeth toward the front and across to the tooth farthest back on the top left side number 16.
The numbers continue by dropping down to the lower (mandibular) jaw.
Number 17 is the tooth farthest back on the left side of the mouth on the bottom.
Numbering continues again toward the front and across to the tooth farthest back on the bottom right side of the mouth number 32.
In this system, the teeth that should be there are numbered.
If you are missing your third molars, your first number will be 2 instead of 1, acknowledging the missing tooth.
If you’ve had teeth removed or teeth missing, the missing teeth will be numbered as well.
The Palmer Notation Numbering System is used by some orthodontists, pedodontists, and oral surgeons.
Originally called the Zsigmondy system after an Austrian dentist of that name who developed the idea in 1861.
The mouth is divided into four sections called quadrants.
The numbers 1 through 8 and a unique symbol is used to identify the teeth in each quadrant.
The numbering runs from the center of the mouth to the back.
In the upper right quadrant tooth, number 1 is the incisor.
The numbers continue to the right and back to tooth number 8, which is the third molar.
The numbers sit inside an L-shaped symbol used to identify the quadrant.
The L is right side up for the teeth in the upper left quadrant.
The teeth in the upper right use a backwards L. For the bottom quadrants, the L is upside down following the same pattern from the uppers.
Letters such as UR or URQ for the upper right or upper right quadrant may also identify the
quadrants.The Federation Dentaire Internationale Numbering System (FDI).
Internationally the
two-digit system is used worldwide.Every branch of dentistry uses this system.
Dental Forcep 88R
-
Dental Forceps 88r Molar Tooth Extracting Surgical Stainless Steel Instruments
-
-
Premium AISI 420 German Stainless Steel with Superior Craftsmanship.
-
Extraction Forceps 88R:
-
Main Function is to remove teeth from bony socket. Suitable for Maxillary Left First and Second Molars.
-
Presidential Forceps for 1st and Upper 2nd Molars. Split beak for engaging palatal root.
-
Bayonet design.
-
-
Each beak has different design to adapt to the maxillary molar roots that differ anatomically on the facial and lingual.
Beak with one projection contours to bifurcation of mesial–buccal and distal–buccal roots. Beak with two projections contours to lingual root.
-
-
-
Tooth extracting forceps are used to extract tooth, designed for use in specific areas of the mouth.
-
The beak is shaped to conform snugly to the contour of the tooth. This makes it easier to reach different teeth effectively.
-
-
Dental Forceps handles are shaped so that a maximum amount of force can be applied to the beaks, while the handles are still in a comfortable position for the oral surgeon.
-
-
Extraction forceps are ideal for extracting teeth from the alveolar bone. All hinged instruments should be cleaned and sterilized in an open position.
-
Forceps are dental instruments used to retract tissues and facilitate suturing, grasping objects and holding them securely.
-
Forceps come in different shapes, angles and sizes each style is designed for specific purposes.
-
Extraction forceps are hinged and used to remove teeth in one piece with the crown and root intact.
-
Non Slip Grip Premium Quality Handle.
-
Polish to high Standard Finish.
-
Fully guaranteed against defect in material and workmanship.
-
Manufactured from High Quality Medical Grade Stainless Steel.
-
High Degree of Precision and Flexibility while conducting the Clinical Procedure.
-
High Degree of Aesthetic and Corrosion Resistance.cryer elevator
برای مشاهده محصولات دیگر برروی کلمهی “ورودبه سایت“ کلیک نمایید . /
-Click on the ” Login o site “ to view other products ./
-
Each quadrant is assigned a number.
The maxillary right quadrant is assigned the number
1, the maxillary left quadrant is assigned the number
2, the mandibular left quadrant is assigned the number
3, and the mandibular right quadrant is assigned the number
4.The teeth within each quadrant are assigned a number from 1 through 8 with 1 being the central incisor and 8 being the third molar.
1398/6/16 SEO & APLOAD BY M.F
-
-
نقد و بررسیها
هنوز بررسیای ثبت نشده است.